Call 781.329.1420
Industrial Grade Coating Reference Guides
Industrial Fluorocarbons Coatings
Coating System |
Outstanding Properties |
Continous Operating Temperature | Thickness Range Per Surface | Approximate Build-Up Per Coat | Curing Temperature | F.D.A. Approvability |
Teflon® T.F.E Teflon® P.T.F.E |
Excellent Hi-Temp resistance Good release |
500°F | 0.8 - 5.0 mil | 0.4 mil* | 700 - 725°F | Yes |
P.C. 8-403 |
Best combination of release and wear |
350°F | 1.0 - 1.5 mil | 0.5 mil* | 700 - 720°F | Yes |
Teflon® S & F.E.P. |
Excellent release Good abrasion resistance Good chemical resistance |
350°F | 0.4 - 2.0 mil | 0.4 mil* | 700 - 720°F | Yes |
Teflon® F.E.P. |
Excellent chemical resistance Good release |
350°F | 0.8 - 4.0 mil | 0.4 mil* | 700 - 720°F | Yes |
P.F.A.® |
Excellent chemical resistance Excellent release Good abrasion resistance |
500°F | 1.0 - 5.0 mil | 0.6 mil* | 720 - 750°F | Yes |
Ceramic Filled P.F.A.® |
Excellent abrasion resistance Excellent release Excellent chemical resistance |
500°F | 1.0 - 5.0 mil | 0.6 mil* | 730 - 750°F | Yes |
Teflon® S |
Excellent abrasion resistance Excellent low friction |
325 - 425°F | 0.5 - 3.0 mil | 0.5 mil* | 450 - 600°F | Yes |
Ceramic Filled T.F.E. |
Excellent hi-temp resistance Good abrasion resistance Good release |
550°F | 0.7 - 2.0 mil | 0.5 mil* | 730 - 750°F | Yes |
Xylan® |
Widest color range Wide cure range Good low friction |
500°F | 0.1 - 0.7 mil | 0.1 - 0.3 mil* | 250 - 700°F | Yes |
TFE Black Conductive |
Hi temperature resistance Drain static charge |
500°F | 0.2 - 1.5 mil | 0.2 - 0.5 mil* | 450 - 600°F | No |
*Mil = .001 inch
Phenolic – Epoxies and Dry Film Lubricants
Coating System |
Outstanding Properties |
Continous Operating Temperature | Thickness Range Per Surface | Approximate Build-Up Per Coat | Curing Temperature | F.D.A. Approvability |
| Phenolic - Expoxies | ||||||
PC-BUFF |
Excellent dielectric Good abrasion resistance Good corrosion resistance |
200°F | 2.0 - 5.0 mil | 1.0 mil** | 190 - 210°F | No |
PC-48T |
Good corrosion resistance Good flexibility Flat black in color |
350°F | 0.5 - 1.5 mil | 0.5 mil** | 350 - 375°F | No |
PC-343 |
Good corrosion resistance Good abrasion resistance Good dielectric strength Good thermal conductivity |
250°F | 1.0 - 6.0 mil | 1.0 mil** | 250 - 300°F | Yes |
| Dry Film Lubricants | ||||||
Electrofilm® |
Excellent lubricant* Molybdenum Disulfide Base |
500 - 1000°F | 0.2 - 0.7 mil | 0.3 mil** | 400°F | No |
Everlube® |
Excellent lubricant* Molybdenum Disulfide Base |
500 - 1000°F | 0.2 - 0.7 mil | 0.3 mil** | 400°F | No |
Molykote® |
Excellent lubricant* Molybdenum Disulfide Base |
400 - 600°F | 0.3 - 0.7 mil | 0.3 mil** | Ambient to 300°F | No |
Teflon® |
Excellent lubricant* Teflon® Base |
300 - 500°F | 0.5 - 1.0 mil | 0.5 mil** | 450 - 700°F | No |
*Meets certain military specification
**Mil = .001 inch
